PhD and MSc Theses

PhD and MSc Theses, since 1988

Advisor Dr. Yoed Tsur
Advisor’s Email tsur@technion.ac.il
Advisor’s Home-Site https://electroceramics.net.technion.ac.il/
No of theses 27
Department Chemical Engineering
Department Web Site chemeng.technion.ac.il/
Student’s Name Graduation Year Degree Abstracts Research Name
Glouckhovski Robert 2017 PhD Abstracts Development of a Novel Proton Exchange Membrane for PEM Fuel Cells and Water Electrolysis
Nakibli Yifat 2014 PhD Abstracts Electrophoretic Deposition of CdTe Nanotetrapods
Mazar Omri 2013 PhD Abstracts Defect Chemistry and Electrical Properties of Donor-doped Proton Conducting Pervoskite-type Oxides
Hershkovitz Shany 2011 PhD Abstracts Harnessing Evolutionary Programming for Impedance Spectroscopy Analysis
Yassen Hanady 2011 PhD Abstracts Preparation, Sintering and Characterization of Barium Titanate Layers by EPD from Aqueous Suspension
Oz Alon 2018 PhD Abstracts Novel Approach to Analyze Impedance Spectroscopy of Electrochemical Power Sources
Shomrat Neta 2017 PhD Abstracts The Influence of Non-Stoichiometry and Doping on Flash Sintering of Oxide Perovskite
Gil Yotam 2009 PhD Abstracts Current-Voltage Relations and Point Defect Distribution in Mixed-Ionic-Electronic-Conductors
Becker Mattan Ze’ev 2020 MSc Abstracts Research of the Mass Transfer Mechanism in Flash Sintering of Ceramic Compounds using Interrupted Flash Experiments
Egbaria Ala 2020 MSc Abstracts Impedance Spectroscopy Analysis of Grain Boundaries in GD-Doped Ceria using Genetic Programming
Drach Zohar 2015 MSc Abstracts Electrical Characterization of Physical Processes in Solid Oxide Fuel Cell/Electrolysis Cell
Zlotnik Victoria 2014 MSc Abstracts Preparation, Application and Characterization of a Proton Conductor for Dual Electrolyte SOFC
Halimi Lea 2014 MSc Abstracts Integration of a Stress-Adaptive Material and Evaluation of the Chemical Expansion for the Mechanical Properties Improvement of Solid Oxide Fuel Cells
Tomer Shiri 2011 MSc Abstracts Highly Porous Anode for Application in Double Electrolyte Fuel Cell
Ya’akobovich Avram 2008 MSc Abstracts Formation of pn or pin Junction in Mixed Ionic-Electronic Conductor as a Result of Oxygen Activity Gradient
Yaakobovitz Barak 2008 MSc Abstracts Development of Detection Methods for Line Edge Roughness
Tesler Alexander 2007 MSc Abstracts Analysis of Impedance Spectroscopy Data Using Genetic Programming Methods
Ram Mirit 2007 MSc Abstracts Chemically and Thermally Induced Expansion in Simple Perovskites
Raichman Yulia 2006 MSc Abstracts Understanding the Nature of Inter-Nanoparticle Bonds in Agglomerates
Yassen Hanady 2005 MSc Abstracts Hydrothermal Synthesis and Characterization of Doped and Un-Doped Nano-Sized Barium Titanate Powder
Levi Roni 2004 MSc Abstracts Early Sintering Kinetics of Nano-Ceramics
Simakov David Stas 2004 MSc Abstracts Surface Stabilization of Nanosized Titanium Dioxide and Preparation of Titanium-Niobium Oxide Nanosized Solid Solutions
Melman Yuri 2004 MSc Abstracts Construction and Characterization of System for Electrical Measurement with Temperature Control
Avioz Cohen Gal 2021 MSc Abstracts Studying the Effect of Operating Conditions and CO2 Cathode Contamination on PEMFCs using Distribution of Relaxation Times Analysis
Beitner Tzvia 2016 MSc Abstracts Determining the Active Cathode Area in Solid Oxide Fuel Cells
Binyamini Yael 2015 MSc Abstracts Implementation of Impedance Spectroscopy Genetic Programming on PEM Fuel Cells
Goren Emanuelle 2015 MSc Abstracts Preparation Application and cCaracterization of a ReRAM Type Nonvolatile Memory Device Made of Oxide Nanoparticles