PhD and MSc Theses
PhD and MSc Theses, since 1988
| Student’s Name |
Graduation Year |
Degree |
Abstracts |
Research Name |
| Rakovsky Artoum |
2013 |
PhD |
Abstracts |
Bioinspired Calcium Phosphte-Polylactide Nanocomposites and Scaffolds with Controlled Pore Architecture for Bone Tissue Regeneration |
| Makarov Carina |
2012 |
PhD |
Abstracts |
Bioresorbable Calcium Phosphate Ceramic-Polymer Nanocomposites for Load Bearing Bone Healing Devices – Low Temperature Synthesis and Drug Incorporation |
| Reiner Tal |
2010 |
PhD |
|
Protein Incorporation in Biomimetic CaP and Sol-Gel Silica Coatings on Ti Alloys for Bone Healing |
| Zlotnikov Igor |
2009 |
PhD |
Abstracts |
Bioinspired Nanolaminates: Synthesis by Deposition of Zirconium Oxide on LbL Organic Layers and Mechanical Behavior |
| Zorn Gilad |
2007 |
PhD |
Abstracts |
Surface Modification and Bio-Functionalization of Low Modulus Ti-Nb and TiNi Alloys Employing Self Assembled Monolayers (SAMs) |
| Katz-Demyanetz Alexander |
2004 |
PhD |
Abstracts |
Kinetics of Reactions and Reactive Synthesis of Metal- Ceramic Composites in Ni-Ti-B System in the Presence of Ti2Ni and NiB Transient Liquid Phases |
| Horvitz Dror |
2004 |
PhD |
Abstracts |
Reactive Forging – a Novel Method of Pressure Assisted Combusrtion Synthesis of Dense Ceramics and in Situ Composites: Ti-O-Al-Mg, B-C-Ti, and Mg-Si Systems |
| Gutman Itamar |
2007 |
PhD |
Abstracts |
Formation Structure and Properties of Periodic Structures at SiO2-Mg Interface |
| Sovak Guy |
2003 |
PhD |
Abstracts |
Bone Tissue Reaction to a Novel Titanium Nitride (TiN) Coating on Titanium Alloy (Ti-6al-4V) Implants and the Effect of Growth Factors and Cell Adhesion Molecules on … |
| Litvak Barak |
2013 |
MSc |
Abstracts |
Wear Resistant TiSiN Nanostructured Multi-Layer Coatings on WC-CO |
| Malka-Markovitz Alon |
2010 |
MSc |
Abstracts |
Calcium Phosphate Deposition on Reticulated NiTi Scaffolds |
| Gilert Roni |
2009 |
MSc |
Abstracts |
Bio-Functionalization of Magnetic Nanopowders Employing Self-Assembled Monolayers (SAM) |
| Gur Ran |
2009 |
MSc |
Abstracts |
Processing and Properties of Nano and Sub-Micron Iron Based Composites |
| Bernstein Michael |
2007 |
MSc |
Abstracts |
Development of Bioresorbable Load Bearing Nanostructured Ceramic-Polymer Composites for Bone Graft Substitutes |
| Zlotnikov Igor |
2005 |
MSc |
Abstracts |
Combustion Synthesis of Functionally Graded Composites Reinforced by Hard Particles |
| Ribak Eliezer |
2004 |
MSc |
Abstracts |
Coating of Graphite and Carbon-Carbon Composite via Reaction with Cr Powder |
| Shalev Olga |
2004 |
MSc |
Abstracts |
Processing and Characterization of Porous Metal-based Structures Designed as Scaffolds for Bone Ingrowth |
| Godley Reut |
2003 |
MSc |
Abstracts |
Surface Modification of a Low Modulus Titanium-Niobium Alloy for Use in Medical Implants |
| Mashall Ido |
2003 |
MSc |
Abstracts |
Reactive Surface Modification of Nickel Alloys by Treatment in Titanium and Nitrogen |
| Zamir Shlomit |
2003 |
MSc |
Abstracts |
Synthesis of Dense Light Weight Al3Ti/B4C Composites by Pressure Assisted Thermal Explosion |
| Khoptiar Yuri |
2002 |
MSc |
Abstracts |
Reactive in Situ Synthesis of Layered Machinable Ti-Based Ternary Ceramic Matrix Composites |
| Trudler Alexander |
2001 |
MSc |
|
Design of Nanocrystalling Cu and Ag-Cu Alloys by Advanced Powder Metallurgy Methods |
| Shenhar Anat |
2000 |
MSc |
|
Growth Kinetics and Mechanical Properties of Tin Coatings For Total Joint Implants |
