| Student's Name |
Graduation Year |
Degree |
Abstracts |
Research Name |
| Goviazin Gleb Gil |
2023 |
PhD |
Abstracts |
Mechanical, Thermo-Mechanical,and Metallurgical Comparison between WAAM and Bulk SS316L |
| Rijensky Oren |
2021 |
PhD |
Abstracts |
Mechanical Response of Polyurea Coated Metallic Plates under Various Hydrodynamic Loading Conditions |
| Fadida Refael |
2020 |
PhD |
Abstracts |
The Mechanical Response of Additively Manufactured Ti6Al4V Specimens Containing Discrete Artificial Voids |
| Rotbaum Yonathan |
2019 |
PhD |
Abstracts |
On the Mechanical Properties of Inverse Freezing Gels |
| Shemtov-Yona Keren )Rima( |
2018 |
PhD |
Abstracts |
Mechanical Durability of Dental Implants |
| Zhang Longhui |
2018 |
PhD |
Abstracts |
Controlling Adiabatic Shear Failure by Tailoring Microstructural Toughening Factors |
| Dolinski Michael |
2016 |
PhD |
Abstracts |
Modeling Adiabatic Shear Failure from Energy Principles |
| Ben-David Eran |
2015 |
PhD |
Abstracts |
Investigation of the Mechanical Response and Characteristics of Thin Free-Standing Films at Various Strain Rates |
| Lovinger Zev |
2014 |
PhD |
Abstracts |
Multiple Adiabatic Shear Bands in a Collapsing Cylinder – Failure Characterization and Microstructural Effects |
| Belenky Alexander |
2013 |
PhD |
Abstracts |
Dynamic Flexural Strength of Advanced Ceramics and its Relation to Structural Defects |
| Osovski Shmuel |
2013 |
PhD |
Abstracts |
Initiation of Adiabatic Shear Bands from a Microstructural Standpoint |
| Saguy Hagit |
2008 |
PhD |
Abstracts |
Identification of Cracks in Metal Conductors by Electrical Potential Technique |
| Wang Zonggang |
2008 |
PhD |
Abstracts |
Experimental Study of Adiabatic Shear Band Formation |
| Neuberger Avidov |
2006 |
PhD |
Abstracts |
Scaling the Structural Response of an Armored Vehicle to a Close-Range Large Explosion |
| Nieto Fuentes Juan Carlos |
2019 |
PhD |
Abstracts |
A Reassessment of the Thermomechanical Coupling in Solids Subjected to Dynamic Loading |
| Vilyatser Daniel |
2021 |
MSc |
Abstracts |
The Effects of Fiber Orientation and Ply Architecture on Crack Propagation Under Mode-I and Mode-II Loading Conditions in Unidirectional and Woven Carbon-Epoxy Laminates |
| Avriel Eyal |
2017 |
MSc |
Abstracts |
Investigating Strength Characteristics of Materials at Very high strain rates using magnetically driven Expanding Cylinders |
| Fadida Refael |
2015 |
MSc |
Abstracts |
Dynamic Mechanical Behavior of Additively Manufactured Ti6A14V with Controlled Voids |
| Ptashnik Idan |
2012 |
MSc |
Abstracts |
Experimental Research of Aluminum Plate Cutting by Flexible Linear Shaped Charge |
| Shavit Amit Shmuel |
2023 |
MSc |
Abstracts |
From Bio-Compatible to Bio-Rejected: Mechano-Chemical Surface Effects on Dental Implant Rejection |
| Nachmann Tzach |
2023 |
MSc |
Abstracts |
The Effect of Stacking Sequence and Ply Orientation on Damage Evolution in Statically Loaded UD Carbon Epoxy Laminates |
| Varfman Bat Hen |
2022 |
MSc |
Abstracts |
Shock Attenuation Characteristics of Aqueous Methyl Cellulose Solution |
| Fonaryov Olga |
2020 |
MSc |
Abstracts |
Evaluation of the Static Fracture Toughness of Advanced Ceramics |
| Godinger Adam |
2020 |
MSc |
Abstracts |
The Influence of Confining Stress on the Ballistic Properties of Soda Lime Glass |
| Levy Daniel |
2018 |
MSc |
Abstracts |
Static and Dynamic Compressive Response of Additively Manufactured Discrecte Patterns of Ti6Al4V |
| Blumer Dvir |
2018 |
MSc |
Abstracts |
The Influence of Microstructure on the Static and Dynamic Strenght of Transparent Magnesium Aluminate Spinel(MgAl2O4) |
| Korabi Raoof |
2018 |
MSc |
Abstracts |
Numerical Modeling of Dental Implant-Bone Interface |
| Stivi Nofar |
2018 |
MSc |
Abstracts |
Constitutive Model For Describing the Mechanical Behavior Of a Glassy Polymer |
| Shapira Guy |
2017 |
MSc |
Abstracts |
Fracture of 1045 Steel under Various Levels of Stress Triaxiality, at Quasi-Static and Dynamic Loading A Numerical and Experimental Study |
| Tzibula Sagi |
2017 |
MSc |
Abstracts |
Investigationof of the Dynamic Tensile Behavior of Glassy Polymers |
| Rotbaum Yonathan |
2015 |
MSc |
Abstracts |
Dynamic Tensile Necking: Influence of Geometrical Imperfections |
| Richler Daniel |
2015 |
MSc |
Abstracts |
Static and Dynamic Mechanical Properties of Gels |
| Glikin Leonid |
2015 |
MSc |
Abstracts |
A Study on Dynamic Penetration of Layered Composite by a Metallic Projectile |
| Chen Sagi |
2015 |
MSc |
Abstracts |
The Dependence of Mechanical Properties on the Nanograins Distribution in HCP Metals |
| Barham Nathanael |
2014 |
MSc |
Abstracts |
Static and Dynamic Mechanical Properties of Ceramic Matrix Nanocomposites for Potential Ballistic Armor |
| Siton Refael |
2014 |
MSc |
Abstracts |
Application of Contact Mechanics to Load Sensing |
| Noam Tomer |
2014 |
MSc |
Abstracts |
Scaling Dynamic Failure of Blast Loaded Structures |
| Kotler Hanna Shira |
2013 |
MSc |
Abstracts |
The Influence of Thermo-Mechanical Treatments on the Dynamic Strength and Failure Properties of Selected Aluminum Alloys |
| Stauber Uri |
2013 |
MSc |
Abstracts |
Mechanical Properties of polyetherimide (ULTEM 1000R) |
| Khokhlov Maxim |
2012 |
MSc |
Abstracts |
Multi-Scale Stereo Photogrammetry Method for Fractographic Analysis Using a Scanning Electron Microscope (SEM) |
| Weisel Eran |
2011 |
MSc |
Abstracts |
An Investigation of the Mechanical Properties of RS66 Magnesium Alloy |
| Belenky Alexander |
2010 |
MSc |
Abstracts |
Static and Dynamic Fracture of Transparent Nanograined Alumina |
| Mergi Meir |
2010 |
MSc |
Abstracts |
The Influence of Residual Stresses and Geometry Changes on Natural Frequencies in Thermally Stressed Bimetal Rectangular Beam |
| Shpitzer Moran |
2009 |
MSc |
Abstracts |
High Velocity Spherical Copper Fragment Penetration into a Ceramic Tile |
| Brill Alon |
2008 |
MSc |
Abstracts |
The Influence of Hydrostatic Pressure on the Dynamic Failure of PMMA |
| Ben-David Eran |
2008 |
MSc |
Abstracts |
A New Instrument for Tensile Testing of Thin Free Standing Films at High Strain Rates |
| Regev Alon |
2008 |
MSc |
Abstracts |
A Comparison of Core and Surface Temperature of a Ductile Polymer under High Strain Rate Loading |
| Ziso Ilan |
2006 |
MSc |
Abstracts |
Dynamic Deformation and Mode II Fracture of Maraging 250 steel |
| Hanina Erez |
2006 |
MSc |
Abstracts |
The Influence of Hydrostatic Pressure on Adiabatic Shear Failure of Metals |
| Samak Dan |
2006 |
MSc |
Abstracts |
Three Dimensional Reconstruction and Visualization of Fracture Surfaces |
| Mizrachi Shai |
2005 |
MSc |
Abstracts |
Experimental Characterization of Transient Temperature Changes during Dynamic Loading by Means of Infrared Sensing |
| Lazarovitch Ronny |
2001 |
MSc |
|
Crack Identipication in Metallic Objects Using Non Destructive Electrical Method |
| Saguy Hagit |
2001 |
MSc |
|
Modeling the Fatigue Properties of WELDOX 700 Steel Specimens Welded by GTAW Method |
| Weisbrod Gil |
1999 |
MSc |
|
Dynamic Fracture of Tungsten Base Heavy Alloys |
| Studny Doron |
1997 |
MSc |
|
Impact Disassemble of Stiff Fasteners (Screws) for Recycling Purposes |
| Shemtov-Yona Keren )Rima( |
2013 |
MSc |
Abstracts |
Effect of Dental Implants' Diameter on their Fatigue Performance |
